Monthly Archives: July 2021

Wednesday 28/7/21 Although I was happy with the overall effect of the featherboard fixing I did yesterday, there were one or two niggles. The main one was the spacing of the stainless steel fixings. They look too high. Also, because … Continue reading →

Tuesday 27/7/21 Today I started by adding “kick-out” wedges to the bottom the the wall panel frame. This picture was taken after they had been fitted and the breather paper stapled to them. I’ve placed a spare wedge in the … Continue reading →

Monday 26/7/21 I’ve been wondering for several weeks how best to deal with the window frame to featherboard detail. Finally I came up with this solution: to run a piece of 50 x 50mm green oak down each side of … Continue reading →

Saturday 24/7/21 Today I reassembled the large front window after painting and fixed it into the wall panel frame. I started by attaching expanding foam around the edges of the window frame. I then temporarily fixed strips of polythene to … Continue reading →

Tuesday 20/7/21 I’ve spent a couple of hours each day over the last few days painting windows. I decided to use OSMO for this. This is a bit of an experiment. I want to see how it goes and if … Continue reading →

Saturday 10/7/21 Yesterday I went to Chandlers to see if they had chipboard flooring. The current materials shortage meant they haven’t had any for many weeks. However, nine boards had just arrived and I needed nine to put the floor … Continue reading →

Wednesday 7/7/21 Today I decided to bite the bullet and remove the lorry strap holding down the wall sill. I started by tightening the four fixings. I was worried that they wouldn’t be sufficiently fixed as, on one of them, … Continue reading →

Sunday 4/7/21 Today I grabbed a couple of hours between family commitments to fill the gap between the wall and the wall sill from the inside of the building. I’d already filled this gap from the outside a couple of … Continue reading →

Friday 2/7/21 A job that’s been hanging around for a while is the filling in of the gap between the wall sill and the top of the wall. Regular readers will know that this sill had quite a bow in … Continue reading →